150,000 GALLON CAPACITY POOL IONIZER CLICK FOR DETAILS 100,000 GALLON CAPACITY POOL INOIZER CLICK FOR DETAILS 50,000 GALLON CAPACITY POOL IONISER CLICK FOR DETAILS 25,000 GALLON CAPACITY SWIMMING POOL IONISER CLICK FOR DETAILS TO 20,000 GALLON CAPACITY SPA IONIZER CLICK FOR DETAILS MOST ECONOMICAL POOL IONIZATION 25K GALLON CLICK IMAGE FOR DETAILS MOST ECONOMICAL POOL IONIZATION 20K GALLON CLICK IMAGE FOR DETAILS MOST ECONOMICAL POOL IONIZATION 50K GALLON CLICK IMAGE FOR DETAILS
 

DO POOL IONIZERS REALLY WORK?
   10 STEPS TO A PERFECT POOL WITH A MINERAL IONIZER.    CAN IONIZERS STAIN POOLS?
Content for class "userdefined1" id "best pool ionizer ioniser in the world" Goes Here

150,000 Gallon Pool Ionizers
Starting at $508

MODEL CPI-5 IONIZER SPECIFICATIONS & FEATURES.
LOWEST IONIZER PRICES ANYWHERE SUPERIOR IONIZATION SYSTEMS

  • 100~240 VOLT AC Ionizer Input Auto-sensing and Auto-ranging Ionizer (Means you don't have to open the box or switch anything, just attach wires)
  • High Efficiency Switching Power Supply: with Fuse Protection and Auto-reset.
  • 12 VOLT DC IONIZER OUTPUT
  • 3.5 AMP IONIZER OUTPUT Higher than any Ioniser competitor at 4 times the price range
  • 42 WATT PEAK: Ioniser output, load dependent
  • 40~120 ° F Ionizer Operating Range
  • ALUMINUM IONIZER ENCLOSURE: NEMA 4 rated weatherproof, protects the ionizers' electronics from moisture, corrosion, and harsh environments. Integral mounting brackets, just screw it to your surface
  • IONIZER ENCLOSURE DIMENSIONS: H 7.75" W 5.0" D 3.5"
  • 150,000 GAL. CAPACITY: (570,000 LITER) 24 HR Pump Time
  • LIFETIME IONIZER CONTROLLER WARRANTY*
  • ADJUSTABLE OUTPUT: For Precise Metering of Ion Production.
  • SOLID STATE ELECTRONIC CIRCUITRY: With automatic sequential polarity switching to keep ionizer electrodes clean and even wearing.
  • LEDS: Display Ionizer Input Power, Ionizer Cell Power, and Ionizer Electrode Polarity
  • IONIZER ELECTRODE CELLS: Three 2" Tee Fittings with 1-1/2" Reducing Bushings (if needed)
  • TRANSPARENT VIEWING CELL: Inspect ioniser electrode without disassembling.
  • HAND TIGHTEN UNION: for easy removal of ionizer electrodes.
  • STAINLESS STEEL IONIZER ELECTRODE WIRING CONNECTIONS: No corrosion and you don't need to take your ionizer controller apart or have a special cord end to replace electrodes.
  • WEATHERPROOF CORD RESTRAINTS, SAFE: Not just a hole in the box with a wire tie, which can chafe and electrically short circuit wires.
  • OUTDOOR RATED WIRES: (water resistant)
  • Meets or Exceeds UL and NSF Standards, components certified, not certified as a whole.
  • INSTRUCTION BOOK: Full 21 page illustrated ionizer instruction and maintenance book included.
  • TEST KIT: Copper ION test kit included.
  • IONIZER ELECTRODE OPTIONS:
  • OPTION 1-BASIC: OUR LEAST EXPENSIVE OPTION: Three sets 85% COPPER 15% ZINC Ionizer Electrodes 6" X 1-3/8" half round with flat sides. Approximately 9-3/4 LBS total weight of electrodes. The LARGEST IONIZER ELECTRODES available anywhere (for this size cell enclosure)
  • OPTION 2-POPULAR: MOST POPULAR OPTION: Three sets 99.5% pure copper ionizer electrodes 7/8" Diameter X 6" Long
  • OPTION 3-HIGH: AUSTRALIAN STANDARD: Three sets of 94% Copper 6% Silver ionizer electrodes Australia Health Standard Approx 2 Lbs. each.
  • OPTION 4-ELITE: ELITE OPTION: Three sets of 67% Copper 33% Silver ionizer electrodes (NASA Standard) Approx 2 Lbs. each.






 

REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
—›   —›  —› —›  —› —› —›

IONIZER CONTROLLER INCLUDES 3 SETS OF 85% COPPER 15% ZINC IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 3 SETS OF 7/8" DIA. X 6" L COPPER IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 3 SETS OF 6% SILVER 94% COPPER IONIZER ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 3 SETS OF 33% SILVER 67% COPPER IONIZER ELECTRODES
ORDER BELOW
CPI-5: IONIZER
OPTION 1:
BASIC
Universal Ionizer
Controller

150,000 Gal. Capacity
3 Sets of Ionizer
Electrodes
15% Zinc 85% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$508+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-5: IONIZER
OPTION 2:
POPULAR
Universal Ionizer
Controller

150,000 Gal. Capacity
3 Sets of Ionizer
Electrodes
99.5% Virgin Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$552+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-5: IONIZER
OPTION 3: HIGH

Universal Ionizer
Controller

150,000 Gal. Capacity
3 Sets of Ionizer
Electrodes
6% Silver 94% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$764+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-5: IONIZER
OPTION 4: ELITE

Universal Ionizer Controller

150,000 Gal. Capacity
3 Sets of Ionizer
Electrodes
33% Silver 67% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$1654+$35 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE SETS FOR YOUR SYSTEM: CHOOSE FROM BELOW
OPTION 1-BASIC
3 SETS OF CPIC3-Z

REPLACEMENT IONIZER ELECTRODES ONLY
15% Zinc 85% Copper

APROX 3-1/4 LBS EA

($125 Each)
$375+20 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION 2-POPULAR
3 SETS OF CPIC3-RS

REPLACEMENT IONIZER ELECTRODES ONLY
99.5% Copper

7/8" diameter X 6" Long
($133 Each)

$399+20 S&H
Quantity:
International Shipping
Calculated at Checkout
OPTION-3 HIGH
3 SETS OF CPIC3-6AG

REPLACEMENT IONIZER ELECTRODES ONLY
6% Silver 94% Copper
APPROX 2 Lbs Ea
($207 Each)
$621+25 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION-4 ELITE
3 SETS OF CPIC3-33AG

REPLACEMENT IONIZER ELECTRODES ONLY
33% Silver 67% Copper

APPROX 2 lbs EA
($507 Each)
$1521+35 S&H

Quantity:
International Shipping
Calculated at Checkout
100,000 Gallon Pool Ionizers
Starting at $393

MODEL CPI-4 IONIZER SPECIFICATIONS & FEATURES.
LOWEST IONIZER PRICES ANYWHERE SUPERIOR IONIZATION SYSTEM
  • 100~240 VOLT AC Ionizer Input Auto-sensing and Auto-ranging Ionizer (Means you don't have to open the box or switch anything, just attach wires)
  • High Efficiency Switching Power Supply: with Fuse Protection and Auto-reset.
  • 12 VOLT DC IONIZER OUTPUT
  • 3.5 AMP IONIZER OUTPUT (Higher than any Ioniser competitor at 4 times the price range)
  • 42 WATT PEAK: Ioniser output, load dependent
  • 40~120 ° F Ionizer Operating Range
  • ALUMINUM IONIZER ENCLOSURE: NEMA 4 rated weatherproof, protects the ionizers' electronics from moisture, corrosion, and harsh environments. Integral mounting brackets, just screw it to your surface
  • IONIZER ENCLOSURE DIMENSIONS: H 7.75" W 5.0" D 3.5"
  • 100,000 GAL. CAPACITY: (380,000 LITER) 24 HR Pump Time
  • LIFETIME IONIZER CONTROLLER WARRANTY*
  • ADJUSTABLE OUTPUT: For Precise Metering of Ion Production.
  • SOLID STATE ELECTRONIC CIRCUITRY: With automatic sequential polarity switching to keep ionizer electrodes clean and even wearing.
  • LEDS: Display Ionizer Input Power, Ionizer Cell Power, and Ionizer Electrode Polarity
  • IONIZER ELECTRODE CELLS: Two 2" Tee Fittings with 1-1/2" Reducing Bushings (if needed)
  • TRANSPARENT VIEWING CELL: Inspect ioniser electrode without disassembling.
  • HAND TIGHTEN UNION: for easy removal of ionizer electrodes.
  • STAINLESS STEEL IONIZER ELECTRODE WIRING CONNECTIONS: No corrosion and you don't need to take your ionizer controller apart or have a special cord end to replace electrodes.
  • WEATHERPROOF CORD RESTRAINTS, SAFE: Not just a hole in the box with a wire tie, which can chafe and electrically short circuit wires.
  • OUTDOOR RATED WIRES: (water resistant)
  • Meets or Exceeds UL and NSF Standards, components certified, not certified as a whole.
  • INSTRUCTION BOOK: Full 21 page illustrated ionizer instruction and maintenance book included.
  • TEST KIT: Copper ION test kit included.
  • IONIZER ELECTRODE OPTIONS:
  • OPTION 1-BASIC: OUR LEAST EXPENSIVE OPTION: TWO sets 85% COPPER 15% ZINC Ionizer Electrodes 6" X 1-3/8" half round with flat sides. Approximately 6-1/2 LBS total weight of electrodes. The LARGEST IONIZER ELECTRODES available anywhere( for this size cell enclosure)
  • OPTION 2-POPULAR: MOST POPULAR OPTION: TWO sets 99.5% pure copper ionizer electrodes 7/8" Diameter X 6" Long
  • OPTION 3-HIGH: AUSTRALIAN STANDARD: TWO sets of 94% Copper 6% Silver ionizer electrodes (Australia Standard) Approx. 2 Lbs. each.
  • OPTION 4-ELITE: ELITE OPTION: TWO sets of 67% Copper 33% Silver ionizer electrodes (NASA Standard) Approx. 2 Lbs each.



    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›

IONIZER CONTROLLER INCLUDES 2 SETS OF 85% COPPER 15% ZINC IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 2 SETS OF 7/8" DIA. X 6" L COPPER IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 2 SETS OF 6% SILVER 94% COPPER IONIZER ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 2 SETS OF 33% SILVER 67% COPPER IONIZER ELECTRODES
ORDER BELOW
CPI-4: IONIZER
OPTION 1: BASIC

Universal Ionizer
Controller

100,000 Gal. Capacity
2 Sets of Ionizer
Electrodes
15% Zinc 85% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$393+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-4: IONIZER
OPTION 2: POPULAR

Universal Ionizer
Controller

100,000 Gal. Capacity
2 Sets of Ionizer
Electrodes
99.5% Virgin Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$419+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-4: IONIZER
OPTION 3: HIGH

Universal Ionizer
Controller

100,000 Gal. Capacity
2 Sets of Ionizer
Electrodes
6% Silver 94% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$567+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-4: IONIZER
OPTION 4: ELITE

Universal Ionizer Controller

100,000 Gal. Capacity
2 Sets of Ionizer
Electrodes
33% Silver 67% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$1147+$35 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE SETS FOR YOUR SYSTEM: CHOOSE FROM BELOW
OPTION 1-BASIC
2 SETS OF CPIC3-Z

REPLACEMENT IONIZER ELECTRODES ONLY
15% Zinc 85% Copper

APROX 3-1/4 LBS EA

($125 Each)
$250+15 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION 2-POPULAR
2 SETS OF CPIC3-RS

REPLACEMENT IONIZER ELECTRODES ONLY
99.5% Copper

7/8" diameter X 6" Long
($133 Each)

$266+15 S&H
Quantity:
International Shipping
Calculated at Checkout
OPTION-3 HIGH
2 SETS OF CPIC3-6AG

REPLACEMENT IONIZER ELECTRODES ONLY
6% Silver 94% Copper
APPROX 2 Lbs EA
($207 Each)
$414+15 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION-4 ELITE
2 SETS OF CPIC3-33AG

REPLACEMENT IONIZER ELECTRODES ONLY
33% Silver 67% Copper

APPROX 2 lbs EA

($487 Each)
$1014+30 S&H

Quantity:
International Shipping
Calculated at Checkout
50,000 Gallon Pool Ionizers
Starting at $258

MODEL CPI-3 IONIZER SPECIFICATIONS & FEATURES.
LOWEST IONIZER PRICES ANYWHERE, SUPERIOR IONIZATION SYSTEMS
  • 100~240 VOLT AC Ionizer Input Auto-sensing and Auto-ranging Ionizer (Means you don't have to open the box or switch anything, just attach wires)
  • High Efficiency Switching Power Supply: with Fuse Protection and Auto-reset.
  • 12 VOLT DC IONIZER OUTPUT
  • 3.5 AMP IONIZER OUTPUT (Higher than any Ioniser competitor at 4 times the price range)
  • 42 WATT PEAK: Ioniser output, load dependent
  • 40~120 ° F Ionizer Operating Range
  • ALUMINUM IONIZER ENCLOSURE: NEMA 4 rated weatherproof, protects the ionizers' electronics from moisture, corrosion, and harsh environments. Integral mounting brackets, just screw it to your surface
  • IONIZER ENCLOSURE DIMENSIONS: H 7.75" W 5.0" D 3.5"
  • 50,000 GAL. CAPACITY: (190,000 LITER) 24 HR Pump Time
  • LIFETIME IONIZER CONTROLLER WARRANTY*
  • ADJUSTABLE OUTPUT: For Precise Metering of Ion Production.
  • SOLID STATE ELECTRONIC CIRCUITRY: With automatic sequential polarity switching to keep ionizer electrodes clean and even wearing.
  • LEDS: Display Ionizer Input Power, Ionizer Cell Power, and Ionizer Electrode Polarity
  • IONIZER ELECTRODE CELLS: One 2" Tee Fitting with 1-1/2" Reducing Bushings (if needed)
  • TRANSPARENT VIEWING CELL: Inspect ioniser electrode without disassembling.
  • HAND TIGHTEN UNION: for easy removal of ionizer electrodes.
  • STAINLESS STEEL IONIZER ELECTRODE WIRING CONNECTIONS: No corrosion and you don't need to take your ionizer controller apart or have a special cord end to replace electrodes.
  • WEATHERPROOF CORD RESTRAINTS, SAFE: Not just a hole in the box with a wire tie, which can chafe and electrically short circuit wires.
  • OUTDOOR RATED WIRES: (water resistant)
  • Meets or Exceeds UL and NSF Standards, components certified, not certified as a whole.
  • INSTRUCTION BOOK: Full 21 page illustrated ionizer instruction and maintenance book included.
  • TEST KIT: Copper ION test kit included.
  • IONIZER ELECTRODE OPTIONS:
  • OPTION 1-BASIC: OUR LEAST EXPENSIVE OPTION: One set 85% COPPER 15% ZINC Ionizer Electrodes 6" X 1-3/8" half round with flat sides. Approximately 3-1/4 LBS total weight of electrodes. The LARGEST IONIZER ELECTRODES available anywhere (for this size cell enclosure)
  • OPTION 2-POPULAR: MOST POPULAR OPTION: One set 99.5% pure copper ionizer electrodes 7/8" Diameter X 6" Long
  • OPTION 3-HIGH: AUSTRALIAN STANDARD: One set of 94% Copper 6% Silver ionizer electrodes (Australia Standard) Approx. 2 Lbs each.
  • OPTION 4-ELITE: ELITE OPTION: One set of 67% Copper 33% Silver ionizer electrodes (NASA Standard) Approx. 2 Lbs. each.







    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›

IONIZER CONTROLLER INCLUDES 1 SET OF 85% COPPER 15% ZINC IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 7/8" DIA. X 6" L COPPER IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 6% SILVER 94% COPPER IONIZER   ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 33% SILVER 67% COPPER IONIZER ELECTRODES
ORDER BELOW
CPI-3: IONIZER
OPTION 1: BASIC

Universal Ionizer
Controller

50,000 Gal. Capacity
1 Set of Ionizer
Electrodes
15% Zinc 85% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$258+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-3: IONIZER
OPTION 2: POPULAR

Universal Ionizer
Controller

50,000 Gal. Capacity
1 Set of Ionizer
Electrodes
99.5% Virgin Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$268+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-3: IONIZER
OPTION 3: HIGH

Universal Ionizer
Controller

50,000 Gal. Capacity
1 Set of Ionizer
Electrodes
6% Silver 94% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$393+$25 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-3: IONIZER
OPTION 4:
ELITE
Universal Ionizer Controller

50,000 Gal. Capacity
1 Set of Ionizer
Electrodes
33% Silver 67% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$668+$25 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE SETS FOR YOUR SYSTEM: CHOOSE FROM BELOW
OPTION 1-BASIC
1 SET OF CPIC3-Z

REPLACEMENT IONIZER ELECTRODES ONLY
15% Zinc 85% Copper

APROX 3-1/4 LBS
$125+15 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION 2-POPULAR
1 SET OF CPIC3-RS

REPLACEMENT IONIZER ELECTRODES ONLY
99.5% Copper

7/8" diameter X 6" Long
$133+15 S&H

Quantity:
International Shipping
Calculated at Checkout
OPTION-3 HIGH
1 SET OF CPIC3-6AG

REPLACEMENT IONIZER ELECTRODES ONLY
6% Silver 94% Copper
APPROX 2 Lbs EA
$207+20 S&H
Quantity:
International Shipping
Calculated at Checkout
OPTION-4 ELITE
1 SET OF CPIC3-33AG

REPLACEMENT IONIZER ELECTRODES ONLY
33% Silver 67% Copper

APPROX 2 lbs EA
$507+25 S&H

Quantity:
International Shipping
Calculated at Checkout
25,000 Gallon Pool Ionizers
Starting at $222

MODEL CPI-2 IONIZER SPECIFICATIONS & FEATURES.
LOWEST IONIZER PRICES ANYWHERE, SUPERIOR IONIZATION SYSTEMS
  • 100~240 VOLT AC Ionizer Input Auto-sensing and Auto-ranging Ionizer (Means you don't have to open the box or switch anything, just attach wires)
  • High Efficiency Switching Power Supply: with Fuse Protection and Auto-reset.
  • 12 VOLT DC IONIZER OUTPUT
  • 3.5 AMP IONIZER OUTPUT (Higher than any Ioniser competitor at 4 times the price range)
  • 42 WATT PEAK: Ioniser output, load dependent
  • 40~120 ° F Ionizer Operating Range
  • ALUMINUM IONIZER ENCLOSURE: NEMA 4 rated weatherproof, protects the ionizers' electronics from moisture, corrosion, and harsh environments. Integral mounting brackets, just screw it to your surface
  • IONIZER ENCLOSURE DIMENSIONS: H 7.75" W 5.0" D 3.5"
  • 25,000 GAL. CAPACITY: (100,000 LITER) 24 HR Pump Time
  • LIFETIME IONIZER CONTROLLER WARRANTY*
  • ADJUSTABLE OUTPUT: For Precise Metering of Ion Production.
  • SOLID STATE ELECTRONIC CIRCUITRY: With automatic sequential polarity switching to keep ionizer electrodes clean and even wearing.
  • LEDS: Display Ionizer Input Power, Ionizer Cell Power, and Ionizer Electrode Polarity
  • IONIZER ELECTRODE CELLS: One 2" Tee Fitting with 1-1/2" Reducing Bushings (if needed)
  • TRANSPARENT VIEWING CELL: Inspect ioniser electrode without disassembling.
  • HAND TIGHTEN UNION: for easy removal of ionizer electrodes.
  • STAINLESS STEEL IONIZER ELECTRODE WIRING CONNECTIONS: No corrosion and you don't need to take your ionizer controller apart or have a special cord end to replace electrodes.
  • WEATHERPROOF CORD RESTRAINTS, SAFE: Not just a hole in the box with a wire tie, which can chafe and electrically short circuit wires.
  • OUTDOOR RATED WIRES: (water resistant)
  • Meets or Exceeds UL and NSF Standards, components certified, not certified as a whole.
  • INSTRUCTION BOOK: Full 21 page illustrated ionizer instruction and maintenance book included.
  • TEST KIT: Copper ION test kit included.
  • IONIZER ELECTRODE OPTIONS:
  • OPTION 1-BASIC: OUR LEAST EXPENSIVE OPTION: One set 85% COPPER 15% ZINC Ionizer Electrodes 3" X 1-3/8" half round with flat sides. Approximately 1-5/8 LBS total weight of electrodes. The LARGEST IONIZER ELECTRODES available anywhere (for this size cell enclosure)
  • OPTION 2-POPULAR: MOST POPULAR OPTION: One set 99.5% pure copper ionizer electrodes 7/8" Diameter X 3 " Long
  • OPTION 3-HIGH: AUSTRALIAN STANDARD: One set of 94% Copper 6% Silver ionizer electrodes (Australia Standard) Approx. 1 Lb.
  • OPTION 4-ELITE: ELITE OPTION:One set of 67% Copper 33% Silver ionizer electrodes (NASA Standard) Approx. 1 Lb.




    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›

IONIZER CONTROLLER INCLUDES 1 SET OF 85% COPPER 15% ZINC IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 7/8" DIA. X 3 " L COPPER IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 6% SILVER 94% COPPER IONIZER   ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 33% SILVER 67% COPPER IONIZER ELECTRODES
ORDER BELOW
CPI-2: IONIZER
OPTION 1: BASIC

Universal Ionizer
Controller

25,000 Gal. Capacity
1 Set of Ionizer
Electrodes 1-5/8 LBS
15% Zinc 85% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$222+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-2: IONIZER
OPTION 2:
POPULAR
Universal Ionizer
Controller

25,000 Gal. Capacity
1 Set of Ionizer
Electrodes
99.5% Virgin Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$232+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-2: IONIZER
OPTION 3: HIGH

Universal Ionizer
Controller

25,000 Gal. Capacity
1 Set of Ionizer
Electrodes Approx 1 LB
6% Silver 94% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$292+$25 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CPI-2: IONIZER
OPTION 4: ELITE:

Universal Ionizer Controller

25,000 Gal. Capacity
1 Set of Ionizer
Electrodes Approx 1 LB
33% Silver 67% Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$438+$30 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE SETS FOR YOUR SYSTEM: CHOOSE FROM BELOW
OPTION 1-BASIC
1 SET OF CPIC1-Z

REPLACEMENT IONIZER ELECTRODES ONLY
15% Zinc 85% Copper
Housed in 2" MPT Plug

Appr. 1-5/8 LBS 3" L
$80+9 S&H

Quantity:
International Shipping
Calculated at Checkout

OPTION 2-POPULAR
1 SET OF CPIC1-RS

REPLACEMENT IONIZER ELECTRODES ONLY
99.5% Copper
Housed in 2" MPT Plug

7/8" Diam. X 3 " Long
$99+9 S&H

Quantity:
International Shipping
Calculated at Checkout

OPTION-3 HIGH
1 SET OF CPIC1-6AG

REPLACEMENT IONIZER ELECTRODES ONLY
6% Silver 94%Copper
Housed in 2" MPT Plug
APPROX 1 Lbs: 3" L
$159+20 S&H
Quantity:
International Shipping Calculated at Checkout

OPTION-4 ELITE
1 SET OF CPIC133AG

REPLACEMENT IONIZER ELECTRODES ONLY
33%Silver67%Copper
Housed in 2" MPT Plug

APPROX 1 lbs: 3" L
$267+20 S&H
Quantity:
International Shipping
Calculated at Checkout
20,000 Gallon Spa & Pool Ionization Systems Starting at $194
UP TO 20,000 GAL. MODEL CSI SPA IONIZER SPECIFICATIONS FEATURES.
LOWEST IONIZER PRICES ANYWHERE, A SUPERIOR IONIZATION SYSTEM
  • 100~240 VOLT AC Ionizer Input Auto-sensing and Auto-ranging Ionizer (Means you don't have to open the box or switch anything, just attach wires)
  • High Efficiency Switching Power Supply: with Fuse Protection and Auto-reset.
  • 12 VOLT DC IONIZER OUTPUT
  • 3.5 AMP IONIZER OUTPUT (Higher than any Ioniser competitor at 4 times the price range)
  • 42 WATT PEAK: Ioniser output, load dependent
  • 40~120 ° F Ionizer Operating Range
  • ALUMINUM IONIZER ENCLOSURE: NEMA 4 rated weatherproof, protects the ionizers' electronics from moisture, corrosion, and harsh environments. Integral mounting brackets, just screw it to your surface
  • IONIZER ENCLOSURE DIMENSIONS: H 7.75" W 5.0" D 3.5"
  • 20,000 GAL. CAPACITY: (76,000 LITER) 24 HR Pump Time
  • LIFETIME IONIZER CONTROLLER WARRANTY*
  • ADJUSTABLE OUTPUT: For Precise Metering of Ion Production.
  • SOLID STATE ELECTRONIC CIRCUITRY: With automatic sequential polarity switching to keep ionizer electrodes clean and even wearing.
  • LEDS: Display Ionizer Input Power, Ionizer Cell Power, and Ionizer Electrode Polarity
  • IONIZER ELECTRODE CELLS: One 2" Tee Fitting with 1-1/2" Reducing Bushings (if needed)
  • TRANSPARENT VIEWING CELL: Inspect ioniser electrode without disassembling.
  • HAND TIGHTEN UNION: for easy removal of ionizer electrodes.
  • STAINLESS STEEL IONIZER ELECTRODE WIRING CONNECTIONS: No corrosion and you don't need to take your ionizer controller apart or have a special cord end to replace electrodes.
  • WEATHERPROOF CORD RESTRAINTS, SAFE: Not just a hole in the box with a wire tie, which can chafe and electrically short circuit wires.
  • OUTDOOR RATED WIRES: (water resistant)
  • Meets or Exceeds UL and NSF Standards, components certified, not certified as a whole.
  • INSTRUCTION BOOK: Full 21 page illustrated ionizer instruction and maintenance book included.
  • TEST KIT: Copper ION test kit included.
  • IONIZER ELECTRODE OPTIONS:
  • OPTION 1. OUR LEAST EXPENSIVE OPTION: One set 85% COPPER 15% ZINC Ionizer Electrodes 3" X 5/8" X 1/2" rectangular shape. Approximately 5/8 LBS total weight of electrodes.
  • OPTION 2. MOST POPULAR OPTION: One set of 99.5% pure copper ionizer electrodes 1/2" Diameter X 3 " Long
  • OPTION 3. HIGH OPTION: One set of 94% Copper 6% Silver ionizer electrodes
    (Australia Standard) CALL OR EMAIL for dimensions & weight.
  • OPTION 4. ELITE OPTION: One set of 67% Copper 33% Silver ionizer electrodes (NASA Standard) CALL OR EMAIL for dimensions & weight




    IONIZER INSTALLATION INSTRUCTION MANUAL- CLICK HERE







    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›
IONIZER CONTROLLER INCLUDES 1 SET OF 85% COPPER 15% ZINC IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 1/2" DIA. X 3 " L COPPER IONIZER
ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 6% SILVER 94% COPPER IONIZER   ELECTRODES
ORDER BELOW
IONIZER CONTROLLER INCLUDES 1 SET OF 33% SILVER 67% COPPER IONIZER ELECTRODES
ORDER BELOW
CSI: SPA & POOL IONIZER
OPTION 1: BASIC

Universal Ionizer
Controller

20,000 Gal. Capacity
1 Set Ionizer Electrodes
15% Zinc 85% Copper
3" X 5/8" X 1/2"
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$194+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CSI: SPA & POOL IONIZER
OPTION 2: POPULAR

Universal Ionizer
Controller

20,000 Gal. Capacity
1 Set Ionizer Electrodes
1/2" Diam. X 3" L
99.5% Virgin Copper
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$204+$20 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
CSI: SPA & POOL IONIZER
OPTION 3:
HIGH
Universal Ionizer
Controller

20,000 Gal. Capacity
1 Set Ionizer Electrodes
6% Silver 94% Copper
Approx. 1/2 Lb
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$268+$25 USA
SHIPPING
Quantity:
International Shipping Calculated at Checkout
CSI: SPA & POOL IONIZER
OPTION 4: ELITE

Universal Ionizer Controller

20,000 Gal. Capacity
1 Set Ionizer Electrodes
33% Silver 67% Copper
Approx. 1/2 Lb.
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instruction
Manual
$338+$25 USA
SHIPPING
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE SETS FOR YOUR SYSTEM: CHOOSE FROM BELOW
1 SET OF D15-CZ
15% Zinc 85% Copper
3" X 5/8" X 1/2"
REPLACEMENT IONIZER ELECTRODES
$28+9 S&H


Quantity:
International Shipping
Calculated at Checkout
1 SET OF D15-IC
99.5% Pure Copper
3" X 1/2" Diam
REPLACEMENT IONIZER ELECTRODES
$33+9 S&H

Quantity:
International Shipping
Calculated at Checkout
1 SET OF D15-6AG
6% Silver 94% Copper
REPLACEMENT IONIZER ELECTRODES
APROX 1/2 LB

$70+9 S&H

Quantity:
International Shipping
Calculated at Checkout
1 SET OF D15-33AG
33% Silver 67% Copper
REPLACEMENT IONIZER ELECTRODES
APROX 1/2 LB

$140+9 S&H

Quantity:
International Shipping
Calculated at Checkout
25,000 Gallon Pool Ionizers
for $119

MODEL CPI-1
IONIZER SPECIFICATIONS
FEATURES
OUR MOST ECONOMICAL MODEL WITH 25K GALLON CAPACITY
  • 120/240 Volt AC ionizer input. MANUAL SWITCH
  • 1.5~12 Volt DC ionizer output. MANUAL SLIDER SWITCH
  • 1 AMP Output Max. LOAD DEPENDENT
  • 12 Watt MAX. output (load dependent)
  • 42~110 ° F Operating range
  • 25,000 GAL. (100,000 LITER) CAPACITY
  • 1 YEAR CONTROLLER WARRANTY
  • ADJUSTABLE OUTPUT for Precise Metering of Ion Production.
  • INTERIOR RATED POWER SUPPLY. You must protect it from Moisture, Corrosion, and Harsh Environments by enclosing it or keeping it indoors.
  • MANUAL POLARITY SWITCH toggle once a week to keep Electrodes Clean and Even Wearing.
  • LED Displays Power.
  • ONE SET of large electrode cells: 7/8" Diameter X 3 " Long 99.5% Pure Copper
  • Electrode Cell has a 2" Tee Fitting: with 1-1/2" reducing bushings (if needed).
  • Stainless Steel Electrode Connections. No Corrosion and you don't need to take your controller apart to replace electrodes.
  • Installation Instructions
  • Copper test kit included.







    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›
CPI-1 IONIZER INCLUDES:
1 Set of Ionizer
Electrodes
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instructions

$119+ $20 S&H
Quantity:

International Shipping
Calculated at Checkout

REPLACEMENT IONIZER ELECTRODE
SETS FOR YOUR SYSTEM


REPLACEMENT IONIZER
ELECTRODES ONLY
99.5% Copper
Housed in 2" MPT Plug
7/8 " Diam. X 3 "
Long
$99+$9 S&H

Quantity:

20,000 Gallon Spa and Pool Ionizers
for $69.99

MODEL EQX-20
IONIZER SPECIFICATIONS
FEATURES
OUR MOST ECONOMICAL MODEL WITH 20K GALLON CAPACITY
  • 120/240 Volt AC ionizer input. MANUAL SWITCH
  • 1.5~12 Volt DC ionizer output. MANUAL SLIDER SWITCH
  • 1/2 AMP Output Max. LOAD DEPENDENT
  • 6 Watt MAX. output (load dependent)
  • 42~110 ° F Operating range
  • 20,000 GAL. (76,000 LITER) CAPACITY
  • 1 YEAR CONTROLLER WARRANTY
  • ADJUSTABLE OUTPUT for Precise Metering of Ion Production.
  • INTERIOR RATED POWER SUPPLY. You must protect it from Moisture, Corrosion, and Harsh Environments by enclosing it or keeping it indoors.
  • MANUAL POLARITY SWITCH toggle once a week to keep Electrodes Clean and Even Wearing.
  • LED Displays Power.
  • ONE SET of ionizer electrode cells: 1/2" Diameter X 3 " Long 99.5% Pure Copper
  • Electrode Cell has a 2" Tee Fitting: with 1-1/2" reducing bushings (if needed).
  • Stainless Steel Electrode Connections. No Corrosion and you don't need to take your controller apart to replace ionizer electrodes.
  • Installation Instructions
  • Copper test kit included.






    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›
CPI-1 IONIZER INCLUDES :
1 Set of Ionizer
Electrodes
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instructions

$69.99+ $20 S&H
Quantity:

REPLACEMENT IONIZER ELECTRODE
SETS FOR YOUR SYSTEM


REPLACEMENT IONIZER

ELECTRODES ONLY

99.5% Copper
Housed in 2" MPT Plug
1/2 " Diam. X 3 " Long

$33+$9 S&H

Quantity:

50,000 Gallon Pool Ionizers
for $129
MODEL EQX-50
IONIZER SPECIFICATIONS
FEATURES
OUR MOST ECONOMICAL MODEL WITH 50K GALLON CAPACITY
  • 120/240 Volt AC ionizer input. MANUAL SWITCH
  • 1.5~12 Volt DC ionizer output. MANUAL SLIDER SWITCH
  • 1 AMP Output Max. LOAD DEPENDENT
  • 12 Watt MAX. output (load dependent)
  • 42~110 ° F Operating range
  • 50,000 GAL. (190,000 LITER) CAPACITY
  • 1 YEAR IONIZER CONTROLLER WARRANTY
  • ADJUSTABLE OUTPUT for Precise Metering of Ion Production.
  • INTERIOR RATED POWER SUPPLY. You must protect it from Moisture, Corrosion, and Harsh Environments by enclosing it or keeping it indoors.
  • MANUAL POLARITY SWITCH: Toggle weekly to keep ionizer electrodes clean and even wearing
  • LED Displays Power.
  • ONE SET of ionizer electrode cells: 1/2" Diameter X 3 " Long 99.5% Pure Copper
  • Electrode Cell has a 2" Tee Fitting: with 1-1/2" reducing bushings (if needed).
  • Stainless Steel Electrode Connections. No Corrosion and you don't need to take your controller apart to replace ionizer electrodes.
  • Installation Instructions
  • Copper test kit included.


























    REPLACEMENT ELECTRODE CELLS FOR YOUR IONIZATION SYSTEM
    —›   —›  —› —›  —› —› —›
EQX-50 IONIZER INCLUDES:
1 Set of Ionizer
Electrodes
Electrode Housing Parts
Copper Ion Test kit
Ionizer Instructions

$129+ $20 S&H
Quantity:
International Shipping
Calculated at Checkout
REPLACEMENT IONIZER ELECTRODE
SETS FOR YOUR SYSTEM

REPLACEMENT IONIZER
ELECTRODES ONLY

99.5% Copper
Housed in 2" MPT Plug
1/2" Diam. X 6 " Long

$53+ $9 S&H

Quantity:
International Shipping
Calculated at Checkout

Do Pool Ionizers Really work? YES!
Pool ionizers do work.
They use a very low level of copper ions and/ or other metals such as silver to kill bacteria and algae. The recommended ionized copper level is less than half the National Sanitation Foundation which is 1.2 ppm. Ionizers typically use 0.3-0.4ppm for sanitizing the water.
However, getting rid of large quantities of algae usually initially, needs to be dealt with by shocking the pool with an oxidizer such as chlorine. Mineral Ionizers usually can't generate enough ions to clear a pool with lots of algae already in it.
This is why it is recommended that the pool be shocked and the pH balanced to 7.2-7.6 before activating your pool ionizer.
40-50 years ago, swimming pools were plumbed with copper plumbing. The chemicals eventually decayed the plumbing, as did the velocity of the water and the corrosive effects of the chlorine (think what the chemicals are doing to your body, if it was deteriorating your pipes). This put traces of copper into the water. The copper would eventually cause a blue staining of the plaster, because there is an unregulated level of copper being introduced into the water and the chlorine oxidizing the copper causing it to drop out of solution. It also reacted with the blond hair of some bathers, to cause that "green hair" effect - that is oftentimes blamed on the chlorine (remember: yellow + blue = green)!
This is usually caused by incorrectly shocking the pool. If you have an ionizer, it is recommended that only liquefied chlorine be used when shocking. Otherwise, it super-oxidizes the copper and it could drop out of solution causing staining.

Not only does copper kill algae, it also kills bacteria and viruses. This leaves you with just organic material which needs to be oxidized to clarify the pool. Usually ionizer owners shock the pool with about 1 quart of liquid chlorine (Clorox) per 10,000 gallons, or potassium monopersulfate (hydrogen peroxide based oxydizer) once a week or if the pool gets cloudy, whichever is sooner. Or you can leave your pool chlorine dispenser set to deliver 0.5ppm at a constant rate. This practice is accepted by many public health localities throughout the United states. The copper (and actually all heavy metals) is an algaecide. It interrupts the plants ability to photosynthesize, thereby killing it. Additionally, more recent studies have shown copper is an excellent germicide and virucide it will be used in hospitals for surgical trays, countertops and even door knobs in the future.

As pools were eventually plumbed with plastic pipe, pool chemical companies started to manufacture liquid algaecides that contained heavy metals (primarily copper, nickel, and silver). Also in the solution, was a sequestering agent, sometimes also called a chelating agent. The purpose of this additive, was to keep the metals in solution in the presence of variations of high & low pH. Without these additives, in the presence of pH extremes, these metals would precipitate out of solution, staining the pool plaster.
So it goes without saying; reasonable pool maintenance must be incorporated in your pool activity, such as checking the pH, alkalinity, and the parts per million of copper in the pool (.03-.04ppm) on a weekly basis. These metals do not evaporate out of the pool, but are consumed by the algae, etc. and could to become concentrated if not checked. Another disadvantage of liquid algaecides, is that these additives eventually wear out. Actually they are consumed by the algae, viruses and bacteria.

Since copper and /or silver are not subject to deterioration from the sun's ultraviolet rays, as is chlorine. The metal that is not consumed by the algae, bacteria and viruses remain in the pool as residual purifying agents.
This gives you a very economical and low maintenance method to keep your pool clean and purified.

10 STEPS FOR A "PERFECT" POOL USING AN IONIZER.

1. SHOCK:
If your pool is not brand new, Filter and Shock the water to 5ppm chlorine 3-5 consecutive days or use a non-chlorine shock at 10ppm for 3-5 consecutive days.

2. BALANCE:
Your pool should be pH balanced to 6.9- 7.4 pH. And tested weekly.

3. TOTAL DISSOLVED SOLIDS:
TDS should be at 750-1500 ppm. (UNLESS YOU HAVE A CHLORINE GENERATION SYSTEM)

4. CYANURIC ACID (STABILIZER):
Ideal range should be 0-30 ppm (UNLESS YOU HAVE A CHLORINE GENERATION SYSTEM)

5. HALOGEN:
Ideal range should be .4 ppm Chlorine OR .8 ppm Bromine. (STATE OR LOCAL HEALTH CODES MAY VARY)

6. TOTAL ALKALINITY:
Ideal range should be 80-120 ppm (usually takes care of itself if pH is balanced)

7. CALCIUM HARDNESS:
Ideal range should be 225-375 ppm.

8. INSTALL YOUR IONIZER:
Install your Ionizer following the directions of the Ionizer manufacturer.

9. COPPER ION LEVELS:
Ideal Range . 3 - . 4 PPM. Normally it takes 1 day or less, of running your ionizer to acheive the proper ion level, so there is no need for supplementing with powders or liquid copper solution.

Run your Ionizer in conjunction with your pump system until you have obtained the recommended level of copper Ions.
Adjust pool pump times and output levels of the Ionizer to continue to maintain . 3 - . 4 ppm copper.
Normally it takes 1 day or less, of running your ionizer to acheive the proper ion level, so there is no need for supplementing with powders or liquid "ION" copper solution.

A copper test kit is usually supplied with the Ionizer, if not, we have them.
Click here for more info copper test kits.

10. ENJOY!!
Now that you have your ion levels adjusted according to your pump time, you will be able to sit back and relax enjoying your mineral-infused pool, knowing that your water has a FORMIDABLE first line of defense against Bacteria, Viruses, Fungus, Yeast, and ALL FORMS OF ALGAE.

WHAT ABOUT POOL IONIZER MAINTENANCE?

The only maintenance needed for your Ionizer is checking the electrodes once per year to ensure they are clean and there is a sufficient amount of electrode left to maintain your copper levels.

Because the electrodes are sacrificial, they will need to be replaced periodically depending on your pool size and usage.

CLICK HERE FOR IONIZER ELECTRODE INFORMATION

Can Ionizers stain pools? (Rarely)

There are 3 reasons why pools can become stained. All ARE EASILY AVOIDABLE.

1. IMPROPER OXIDIZING:
The number one reason pool staining occurs when using an ionizer is due to improper use of oxidizing materials (chlorine tablets or granules).
People throw the tablets or granules of chlorine directly into the pool.
The suspended copper Ions become oxidized by the extremely powerful concentration of chlorine.
This causes the copper to fall out of suspension, which can cause staining where the tablets or granules were dumped or even cause a ring around part of the pool.
TO AVOID THIS: Use LIQUID chlorine such as clorox or any generic liquid bleach OR potassium monopersulfate, a hydrogen peroxide based oxidizer.

2. RUNNING YOUR IONIZER UNCONTROLLED:
Pools can become stained if the Ionizer is allowed to run unchecked for extended periods of time.
TO AVOID THIS: Check your Ion levels periodically and adjust your ionizer controller. Usually once a week is sufficient.

3. HIGH TEMPERATURES & pH OUT OF CONTROL:
pH and temperature extremes combined. If your pool becomes unbalanced on the alkaline side, (8.2 & UP) and the temperature is very hot, you can run a risk of staining.
TO AVOID THIS: Simply maintain the recommended pH of 7.2 - 7.6

If staining occurs, not to worry..we have or can recommend a pool stain treatment product that will reverse the staining.

POOL AND SPA IONIZATION PROCESS

WHAT IS IONIZATION?

The process by which a neutral atom or molecule acquires a positive or negative charge.

WHAT IS AN ION?

An ion is a charged atom or molecule. It is charged because the number of electrons do not equal the number of protons in the atom or molecule.
An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less than the number of protons in the atom

WHAT IS A POOL IONIZER?

In the case of Pool Ionizer or Mineral Purifier; it consists of a low voltage DC power supply and a set or sets of sacrificial electrodes.
The electrodes can be made of pure copper or copper with alloys consisting of anything from Silver to Zinc or any combination thereof.

HOW DOES A POOL IONIZER WORK?

When ionizer electrodes are submerged in a solution,( in this case your Pool or Spa water) and a DC electrical current is induced into the ionizer electrodes, the positively charged electrode
seeks the negatively charged electrode. This attraction causes the copper electrode to give up it's electrons. The electrons get swept away in the flow of the water that is
circulating in your pool water (pump system). These electrons seek negatively charged surfaces such as the cell walls of Bacteria, Algae, Viruses and Mold. Once they have
found the negatively charged surfaces of these organisms, they bond to them and disrupt the normal intake of nutrients to the cell causing starvation of the undesirable
organism, this causes the mortality of the cell.